Skip to content

Court Finishing

Court Lighting & Fencing in Charlotte

A properly lit, fully enclosed court you can use safely after dark and through every season.

  • On-Site Evaluation
  • New & Retrofit
  • Itemised Estimate
  • Final Walkthrough
A tall light pole with multiple large floodlights arranged in a circular pattern against a clear blue sky.

What Goes Wrong

Common failures in court lighting & fencing installs

Cutting corners on layout or materials creates problems that are expensive to fix after the fact.

Uneven Light Coverage

Fixtures placed without a court measurement leave dark corners that make evening play unsafe and frustrating.

Layout-First Placement

The builder maps fixture positions to the court’s exact dimensions before a single mounting arm is set.

Wrong Fence Height

A fence that is too short for the sport lets balls escape constantly, interrupting play and frustrating users.

Sport-Matched Height

Fence height is specified per sport: 10-foot panels for most backyard courts, 12-foot for shared HOA courts.

Hidden Wiring Costs

Skipping a power source check before the job starts means trenching or panel upgrades appear mid-project.

Power Check First

The builder confirms the existing supply can handle the fixture load before conduit or wiring work begins.

Fence Material Mismatch

Standard galvanized chain link corrodes faster on high-traffic shared courts, loosening posts within a few seasons.

Traffic-Rated Materials

Vinyl-coated steel fencing is specified for HOA and shared courts where corrosion resistance and durability matter most.

Common problems, answered

Scope of Work

What court lighting & fencing covers

Both elements can be installed together on a new court or added individually to an existing one.

Fence-Mounted Lighting Arms

Arms fixed to existing posts to carry LED fixtures.

Independent Light Poles

Freestanding poles where fence mounting is not suitable.

Junction Boxes & Conduit

Wiring run and protected before the surface is finished.

Fence Post Footings

Posts set in concrete at the correct spacing for panel height.

Play After Dark

Lighting and fencing turn a court into a fully usable space

Charlotte’s warm climate extends the outdoor season well into the evening, making after-dark play a practical need.

Request an Evaluation

For new court builds, lighting and fencing are planned alongside the court layout so post footings are set during base preparation. LED sports fixtures are positioned on mounting arms at a height and spacing that delivers even coverage across the full playing surface. The power source is confirmed and conduit run before the court surface is finished so no trenching is needed afterward.

Retrofit installs follow a site measurement and layout check first. The assessment covers the existing court dimensions, identifies the correct fence post spacing, and confirms whether the current power supply can support the fixture load. Chain link and mesh net fencing are the most common choices; vinyl-coated steel resists corrosion and handles the traffic levels typical of HOA shared courts.

Fence height is matched to the sport and site. A 10-foot fence is standard for most backyard courts; shared-use HOA courts often use 12-foot panels for better ball containment. Lighting arms can be fence-mounted or set on independent poles depending on the court layout. A final walkthrough confirms even light coverage and secure post installation before the job closes.

Why Choose Us

Why Charlotte Court Builders for lighting & fencing?

Accountability and process matter as much as materials when the job involves electrical work and structural posts.

Site Visit Before Any Estimate

Every enquiry starts with an on-site evaluation so the estimate reflects the actual court, not a guess.

Itemised Written Estimate

Lighting, fencing, wiring, and hardware are listed as separate line items so nothing is hidden.

Backyard & HOA Courts Both Covered

We cover private home courts and higher-traffic shared HOA facilities across Charlotte.

Retrofit & New Build Experience

The same process applies whether the court is brand new or needs lighting and fencing added years later.

Final Walkthrough Included

Light coverage and post installation are confirmed on-site before the job is signed off and closed.

Aerial view of multiple illuminated tennis courts at night with bright floodlights.
Finished regulation tennis court with acrylic surface and crisp white line striping backyard

The Process

From first call to finished court

Request an Evaluation

  1. 01

    Request an Evaluation

    Tell us the court location and what you need. We schedule a site visit to assess the layout.

  2. 02

    Review Your Estimate

    You receive an itemised written estimate covering fixtures, fencing, conduit, and hardware before any work is scheduled.

  3. 03

    Install & Walk Through

    The builder completes the install and confirms even light coverage and secure post placement at a final walkthrough.

Pricing Estimates

Typical Court Lighting & Fencing Prices

JobTypical cost
Basic fencing$3,000-$8,000
Court lighting package$5,000-$15,000
Lighting and fencing together$10,000-$25,000
These prices are estimates and often vary with the condition, size and scope of each job. Message or call us for a free, no-obligation quote.
See all prices

Common Questions

Court lighting & fencing questions answered

  • How do I know if the lighting will cover the whole court evenly?

    Even coverage depends on fixture placement, mounting height, and beam angle, all calculated before installation. An on-site evaluation maps the court dimensions and identifies any obstructions that could create shadows. Fixtures are then positioned so overlapping beam patterns eliminate dark zones across the full playing surface.

  • Why do court lights end up with glare or dark spots?

    Glare usually comes from fixtures mounted too low or aimed at the wrong angle, while dark spots result from too few fixtures or poor spacing. Both problems trace back to skipping a proper layout plan before installation. A site evaluation that accounts for court size, pole height, and beam spread prevents both issues from the start.

  • Can lights be added to my existing court fence?

    Yes, in many cases lights can be mounted to existing fence posts, but the posts must be structurally sound and set at the right height. An on-site evaluation checks post gauge, depth, and spacing before any fixtures are attached. If the existing structure cannot carry the load safely, new dedicated poles are recommended.

  • Do I need a full rebuild if the fence is already there?

    Not necessarily. If the existing fence is structurally intact and correctly positioned, it can often stay. The on-site evaluation checks post depth, panel condition, and gate alignment to confirm what can be kept. Only sections that are damaged, undersized, or incorrectly placed would need to be replaced.

  • Will the fence hold up to regular play and heavy use?

    A properly specified and installed court fence is built for repeated ball impact, foot traffic near the perimeter, and weather exposure. The key factors are post depth, gauge of the mesh or chain link, and secure tensioning. Courts that see heavy daily use need heavier-gauge materials and deeper post footings than a lightly used backyard setup.

  • How much does court lighting and fencing cost when support or wiring changes are needed?

    When additional pole foundations or electrical runs are required, total project cost rises. Most jobs in this range come in at $3,000-$8,000, depending on court size, number of fixtures, and how far the wiring must run from the panel. An itemised written estimate is provided after the on-site evaluation so you see every line item before committing.

  • What fence type works best for my court use and traffic level?

    Chain link with a vinyl coating is the most common choice for courts with heavy daily use because it handles ball impact well and resists corrosion. Welded wire panels offer a cleaner look for lower-traffic residential courts. The right gauge and height depend on the sport, player age group, and how close the fence sits to the playing lines.

  • What fence types do people usually compare for a sports court?

    The main options are galvanized chain link, vinyl-coated chain link, and welded wire mesh panels. Galvanized is the most affordable but shows rust over time in humid climates. Vinyl-coated lasts longer and looks cleaner. Welded mesh panels are rigid and tidy but cost more and are better suited to lower-impact sports like pickleball than basketball.

More questions about Court Lighting & Fencing?

Get an On-Site Court Evaluation

Tell us the site and the sport, and we’ll schedule an assessment of the ground, layout, and power supply. You’ll get a written estimate covering every part of the install before anything is scheduled.

Request an Evaluation