One Court, Multiple Sports
One surface, regulation striping for basketball, pickleball, and tennis, sized to fit your yard.
What Goes Wrong & Why
Rushed installs skip the steps that determine whether a court drains, stays level, and holds up through seasons of play.
A base placed on uneven or clay-heavy ground shifts over time, causing cracking and standing water after rain.
The builder measures site slope and checks drainage before any base layer is selected or placed.
Using an existing slab without assessing its level and crack condition leads to surface failure within a few seasons.
Every existing slab is checked for level, drainage, and crack condition before it is accepted as the foundation.
Courts marked for one sport only waste the surface area and require a full re-stripe to add a second game later.
Line layouts for basketball, pickleball, and tennis are planned together before any striping is applied to the surface.
Without edge drainage, runoff from heavy rain pools at the court surface and accelerates surface wear and tile movement.
A drainage system at the court perimeter is part of the standard scope, not an optional add-on.
Scope of Work
From the first grade check to the final line stripe, every stage of the install is handled as part of the scope.
The builder measures the available footprint and checks slope and drainage before any base or surface decision is made.
Concrete slab, asphalt base, or existing slab assessment, the right foundation is selected for the ground conditions and intended use.
3/4-inch interlocking sport tiles are installed over the prepared base for a consistent playing surface with no cure wait.
For larger footprints or higher-traffic courts, a poured acrylic coating over the base slab delivers a more durable finish.
Basketball, pickleball, and tennis markings are applied to the same surface using regulation dimensions for each sport.
Smaller Charlotte yards can accommodate a half-court basketball layout or a full pickleball court within a compact footprint.
In-ground or surface-mount hoop set to regulation height.
Perimeter channel drainage to manage heavy runoff.
Ground prep for sloped or uneven yard conditions.
Worn or cracked surfaces assessed and restored.
Why Choose Us
Every project starts with a site visit and ends with a signed-off walkthrough, no guesswork in between.
A builder visits the site to check grade and drainage before a single line item is put on paper.
Base prep, surfacing, drainage, and line marking are listed separately so you see exactly what is included.
The job is not closed until the finished court has been walked through and confirmed against the agreed scope.
Builders familiar with the region’s clay-heavy soil and varied yard sizes across established and new-build neighborhoods.
Handles residential backyards, HOA facilities, and school courts across Charlotte, Ballantyne, and surrounding areas.
Worn or cracked courts can be assessed and restored without a full reinstall where the base is still sound.
How It Works
01
Submit your site details and we’ll arrange a local builder to visit, check the grade, and assess drainage conditions.
02
You receive an itemised estimate covering base preparation, surface type, line striping, and drainage as separate line items.
03
Once installation is complete, a final walkthrough confirms the surface, markings, and drainage match the agreed scope.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Small backyard multi-sport court | $15,000-$35,000 |
| Standard multi-sport court | $20,000-$50,000 |
| Larger multi-court setup | $50,000-$160,000 |
Tell us the site and the sports, and we’ll arrange a local builder to assess the ground and put the full scope in writing, no commitment required before you see the itemised estimate.